Wheel Stops FAQs

Wheel stops are recommended wherever there is a drop of 150mm to 600mm to a lower level. They are also recommended in front of barriers to prevent nuisance impacts.

Safe Direction wheel stops are 1650mm long and 100mm high.  The width at the base of the wheel stop is 160mm. These dimensions comply with the requirements of AS 2890.1.

Each wheel stop is anchored with three (3) anchors. When installed in concrete, M16x140mm through bolts are used. For installation in asphalt, M12x300mm spikes are recommended.

Each wheel stop is 18kg.

The wheel stops are manufactured from recycled tyre crumb rubber and are supplied with yellow reflective tape.