RHINO-STOP® Screen FAQs

RHINO-STOP Screen w-beam guardrail safety barrier features specially engineered base plates that are designed to yield upon impact and absorb the kinetic energy of the impacting vehicle. This reduces the forces transferred through the anchor bolts and prevents damage to the concrete substrate.

RHINO-STOP Screen w-beam guardrail safety barrier complies with the 30kN impact load described for Light Traffic Areas in AS/NZS 1170.1.

RHINO-STOP Screen may be installed at a system height of 2500mm, 2100mm or 1800mm. This allows the system to be configured to site specific requirements providing floor to ceiling protection.

Each RHINO-STOP Screen post is anchored with four (4) M20 anchors with a typical embedment depth of 105mm. Mechanical anchors may be used when the substrate is 200mm thick and 32Mpa. When the substrate is less that 200mm, chemical anchors may be used. Please contact Safe Direction for details of anchors.

The maximum spacing between RHINO-STOP Screen posts is 2000mm.

Yes. Typically RHINO-STOP Screen is installed with mesh panels. The aperture opening is just 9mm providing anti-climb protection. RHINO-STOP Screen may also be installed with customised infill such as perforated panels depending upon architectural requirements.

RHINO-STOP Screen posts and w-beam guardrails are hot dip galvanised.