log rail with timber clad steel c post t18 log rail roadside crash barrier system log rail road barrier log rail road crash barrier t18 log rail road safety barrier t18 log rail with the strength of steel t18 log rail road traffic barrier road barrier protection with t18 log rail t18 log rail road guard rail

T18 Log Rail Traffic Barrier

Road traffic barrier combining strength, beauty and impact performance.

Mash 2 Compliant-01
Log-Rail-300x169

Features

  • Compliant with MASH Test Level 2
  • Compliant with AS/NSZ 3845.1
  • Combines the natural beauty of wood with the strength of steel
  • Available in post spacings of 2m and 4m
  • Timber clad, steel C-posts
  • C-posts can be driven directly into the ground

T18 Log Rail FAQs

What crash test impacts have been performed with MASH T18 Log Rail?

MASH T18 Log Rail has been crash tested in accordance with Test Level 2 of the Manual for Assessing safety Hardware (MASH).

The MASH specification is an update to and supersedes NCHRP- 350 for the purposes of evaluating new safety hardware devices. MASH is also the basis of testing procedures as stated in AS/NZS 3845.1: 2015 Road Safety Barrier System and Devices. The introduction of MASH follows changes to the vehicle fleet, researching of real-life impact conditions and updated criteria for evaluating barrier performance.

The MASH Test Level 2 impact is performed with a 2270kg pick-up truck travelling at 70km/h and 25 degrees.

How does T-18 Log Rail function?

Safe vehicle containment and re-direction is developed through a combination of the tensile strength of the steel components and the energy-absorbing characteristics of wood.\n\nUpon impact, the posts absorb some of the crash energy through post rotation in the surrounding soil prior to separation from the rail as they fully yield. The rail is released from the supporting posts once the connection bolt shears.

Once the rail separates from the posts, the rail forms a re-directive ribbon, guiding the vehicle away from the nearby hazard.

How is T-18 Log Rail assembled?

The rail element is constructed from a 180mm diameter Douglas fir log. A steel U-channel is factory-fitted into the rear of the log providing the necessary tensile strength required for vehicle containment and re-direction. The rails are supplied in standard lengths of 4m.

The supporting posts comprise a steel C-section that is driven directly into the ground. Once installed, the C-posts are fitted with the 180mm diameter timber cladding.

A specially engineered fishplate is used to splice the rail elements and secure the rails to the supporting posts. This assembly requires just three (3) bolts providing rapid installation. The adjustment in this connection allows for the necessary horizontal and vertical adjustment required for most roadside sites.

What is the spacing between posts?

Posts are typically installed at 2m centres.

What radius can be achieved using T-18 Log Rail?

The adjustment in the fishplate connection allows for a horizontal radius of 20m to be achieved using 4m long rail elements. In the event that a tighter radius is required, 2m rail elements can be provided.

How are the end terminals installed?

T-18 Log Rail is terminated by tapering the last rail element from full height to ground level. A special fishplate is used to connect the rail to the supporting post at this junction.

What is the T18 Log Rail made of?

The T18 Log Rail Safety Barrier is constructed from pressure-treated Douglas fir.

Make an enquiry

    Upload a PDF or Image (File size limit: 2mb)